NEWS

NEWS

ÖKOPROFIT® 2013/2014

1sd interim meeting

September 2013 a project for environmental & climate protection ÖKOPROFIT® started, now the companies involved have the interim results.

Read more

ÖKOPROFIT ® - first interim meeting (ECO Project)

In September 2013, the project for environmental and climate protection ÖKOPROFIT ® is started, now pull the companies involved , among them DÜCHTING PUMPEN have the first interim results.

The environmental and climate protection project ÖKOPROFIT ® of the circle Ennepe -Ruhr is nearing completion . In particular, small and medium-sized enterprises should be encouraged to implement projects in the company's environmental and climate protection, aiming not only to compliance with the relevant environmental legislation , but also lead to cost savings. Within the last few months , the project participants were tested for their optimization potential , particularly in relation to the important issue of energy efficiency , reviewed and supported in the change .

On the 20th of February. 2014 presented the companies involved in the project as part of an interim report presenting a selection of their previous measures for environmental and climate protection.DÜCHTING PUMPEN and the other project participants were able to show a great success .

For example, ventilation systems were optimized , old e- devices replaced by more efficient , lighting replaced ( LED ) and made ​​an adjustment of the heater / thermostats and optimizes the compressed air network.

To be continued ....

SALES MEETING 2014

1sd int. SALES MEETING

An exciting and eventful week layes behind us. This year DÜCHTING opened it’s headquarter in Witten for the first SALES MEETING.

Read more

1sd int. SALES MEETING 2014

An exciting and eventful week layes behind us. This year DÜCHTING PUMPEN opened it’s headquarter in Witten for the first international SALES MEETING.

42 people from 23 countries have accepted our invitation and spent three exciting, educational and communicative days with us.

The response was overwhelmingly positive and the large "DÜCHTING family" has become a lot closer together.

In time also our new WORLDgarden was completed.

New Service-Partner EWEX

For several years, we are supported by the highly qualified staff of EWEX-ENGINEERING...

Read more

For several years, we are supported by the highly qualified staff of EWEX-ENGINEERING in several worldwide service operations. Since May 2015, they joint us in  co-operation as the official service partner.

Chinese safety certificate

Since beginning of this year we are in possession of the safety certificate...

Read more

Chinese safety certificate for the pump series HPXU (HK)

Since beginning of this year we are in possession of the safety certificate of approval for mining products for our HPXU (HK) series. By obtaining this certificate from “The State Administration of Coal Mine Safety” we may sell our HPXU (HK) pumps into the Chinese coal mines. The certificate guarantees and ensures that our pumps type HPXU (HK) can be used in coal mines without safety concerns.

ACHEMA 2015

The mass of people at the ACHEMA 2015 was overwhelming and made the fair for DÜCHTING PUMPEN, our representatives, customers and visitors a great experience.

Read more

ACHEMA 2015

The quality of the discussions with visitors from Germany and abroad, the number of new contacts made and the presence of our partners, customers and visitors and their response to our booth presentation and the new product portfolio were very interesting and very positive.

We thank all visitors and guests and hope that our products and services caught your interest. We look forward to seeing you at the next opportunity.

Should you require further information, offers or contact please do not hesitate to contact us at any time.

Presentation: SICcast for Desalination (Spanish)

Jose Espinosa ...

Read more

Presentation: SICcast forDesalination (Spanish)

Jose Espinosa (Manager Seawater Desalination) held a presentation with the focus "SICcast for Desalination" (spanish) at the AEDyR in Madrid.

Read more here...

Watch the video here: https://www.youtube.com/watch?v=J5rQfi6e6_o

Presentation: High Pressure Pumps & SICcast for desalination

Antonio Avello (Area Sales Manager South America) and Jose Espinosa (Manager ....

Read more

Presentations: High Pressure Pumps & SICcast for desalination

Antonio Avello (Area Sales Manager South America) and Jose Espinosa (Manager Seawater Desalination) held lectures/presentations at the 1st Seminar "Desalación por Osmosis Inversa" in Cabo San Lucas (Mexico) with the topics "SICcast for seawater desalination" (Spanish) and "high-pressure pumps for seawater desalination "(Spanish).

Participants were recognized manufacturers around the water market, International Manufacturers (instrumentation, pumps, chemical dosing systems, filters, containers ...) and plant manufacturers.

ATEX for mineral cast pumps

The mineral cast pumps type MC series comply with the ATEX regulations (EC directive 94/9 / EC) and ...

Read more

ATEX for mineral cast pumps

The mineral cast pumps type MC comply with the ATEX regulations (EC directive 94/9 / EC) and can be used in the following hazardous areas.

Ex II 2g c IIC T5 X

Ex II 2D c T100°C X

ÖKOProfit - Awarded as a "Leuchtturm-Projekt"

We already reported on the successful participation in the ÖKOPROFIT project 2013/2014. Now DÜCHTING PUMPEN was additionally awarded ...

Read more

 

Ökoprofit - "Ecological Project for Integrated Environmental Technology" - is a certification process, whose aim is the sustainable economic and ecological strengthening of companies.

As part of the anniversary event "15 Years of Ökoprofit Nordrhein Westfalen" 15 flagship projects were selected from 75 competition entries in five categories. DÜCHTING PUMPEN was awarded in the category "employee engagement".

Factsheet DÜCHTING PUMPEN (de)               Pictures: Efficiency Agency NRW

In-house: Fire at will!

The Big BANG at DÜCHTING PUMPEN.

During the recurrent training for internal firemen also aerosol cans are blown up ....

Read more

Fire at will!

 

The Big BANG at DÜCHTING PUMPEN.

During the recurrent training for internal firemen also aerosol cans are blown up. 23 employees have been trained as firemen this year.

PR: Highly wear-resistant pump for abrasive materials

Düchting extends its pump-portfolio with a series of single-stage centrifugal pumps. The WRX series was developed for the transportation...

Read more

Highly wear-resistant pump for abrasive materials

Extension of the "Heavy duty" portfolio

Highly wear-resistant pump for abrasive materials

Düchting extends its pump-portfolio with a series of single-stage centrifugal pumps. The WRX series was developed for the transportation of abrasive materials and is suitable for use in dredgers and other strenuous applications in the mining and processing of gravel and sand.

The new WRX series was developed for the toughest conditions and abrasive products. It is highly resistant to both the stress caused by sliding wear (fine particulate matter such as sand) and the impact stress of larger particles (eg, gravel).

The design characteristics of these single-stage centrifugal pumps are such that allow an oversized wall thickness for the wear plates on the suction and drive side of the pump. Even the closed, 2 or 3-vaned impeller, is designed for use in harsh environments with high stress loads. Shaft sealing can either by stuffing box or mechanical seal. The bearings are durable, oil or grease lubricated, heavy duty bearings which are used to ensure long service life and also reduce vibration and noise.

The hydraulic components of the WRX pump are made of various grades of cast iron, and are selected by the Düchting engineering for each particular application. Standard material for wear parts is high chromium abrasion resistant cast iron with hardening of min. 550 HV. Other materials are available on request.

Additional adaptations of the WRX series include its usage as an underwater pump in a vertical cantilever design and a counterclockwise rotation design for internal combustion engine drives.

The WRX-pump is designed to operate at low speeds reducing the wear and thereby lowering operating costs and extending the life of the pump.

Given the robust design and capability of handling flow rates up to 22,000 gpm (5,000 m m3/hr) and pressures up to 150 psi (16 bar) the WRX series is ideally suited but not limited to the use in sand and gravel plants, such as suction dredgers. Other target markets would be the iron and steel industry, coal and potash mining, chemical industry, and the sugar industry.

Read more about the WRX here.

In house: New Media & Press section online

From now on, all publications such as articles, press releases and ads are available for viewing online at your disposal by clicking Media & Press at the top of the page.

Read more

New Media & Press section online

 

In house: DPRU - DÜCHTING PUMPS Russia

DÜCHTING is happy to announce that an influential decision was made in June 2016, on opening a sales office in Saint Petersburg, Russia.

The Russian representative ...

Read more

DPRU - DÜCHTING PUMPS Russia

DÜCHTING is happy to announce that an influential decision was made in June 2016, on opening a sales office in Saint Petersburg, Russia.

The Russian representative Duchting-nasosy GmbH was founded in order to offer customers the best technical support and an optimized information flow.

The possibilities of the Russian representation will be increased and custom-designed by a direct information channel to DÜCHTING PUMPEN in Germany. Bureaucratic obstacles such as the customs clearance of the goods by the customer will be degraded. A process optimization, cost reduction and shortened delivery times are only three supporting decision support for a new Düchting representation in Russia.

Over 1000 MCC pumps sold

With the current orders received from China, more than 1000 MCC pumps have been sold worldwide.

A sizable number in the MCC's twentieth anniversary year after ...

Read more

Over 1000 MCC pumps sold

With the current orders received from China, more than 1000 MCC pumps have been sold worldwide.

A sizable number in the MCC's twentieth anniversary year after the first edition of the original MCL version. The forward-looking, trend-setting success concept was proven right and will prove itself in the future.

Open Mineral Cast Impellers for MC series

Together with the growing range of applications we recognized an increase of requests for MC type pumps with open impellers. These requests are not only coming from new customers ...

Read more

Open Mineral Cast Impellers for MC series

Together with the growing range of applications we recognized an increase of requests for MC type pumps with open impellers. These requests are not only coming from new customers. Also a lot of clients which already successfully use our MC pumps are asking for open impellers. They have applications where they want to have the benefit of using our SICcast®material, but where their process forces them to use open impeller.

To fulfil these increasing needs DÜCHTING engineers developed open impellers for the MC pump series. Our clients now can choose between the standard, well approved closed impellers, or our brand new open impellers. The design of the open impellers allows us to easily replace a closed impeller with an open one in an existing pump without any necessary major changes to the pump.

If you want to learn more about our open impellers for the MC series please contact our sales team.

New Representative in the USA!

Düchting Pumps North America signed a contract with ESL - Environmental Services, Ltd. as a new representative in the USA for all markets in North Dakota, South Dakota, Minnesota, Eastern Montana and Eastern Wyoming.

Read more

New Representative in the USA!

Düchting Pumps North America signed a contract with ESL - Environmental Services, Ltd. as a new representative in the USA for all markets in North Dakota, South Dakota, Minnesota, Eastern Montana and Eastern Wyoming.

Under the premise of bringing a local vendor of Engineered Products and Services into the North Dakota market, Environmental Services, Ltd. was formed in 1989.

Environmental Services, Ltd. is committed to providing the highest quality products and services, adding value through knowledge and experience, for everyone we work with, using integrity, cooperation and reliability.

 

Read more under: www.eslmandan.com/

upcoming FAIRS

ÖKOPROFIT® 2013/2014

1sd interim meeting

September 2013 a project for environmental & climate protection ÖKOPROFIT® started, now the companies involved have the interim results.

Read more

ÖKOPROFIT ® - first interim meeting (ECO Project)

In September 2013, the project for environmental and climate protection ÖKOPROFIT ® is started, now pull the companies involved , among them DÜCHTING PUMPEN have the first interim results.

The environmental and climate protection project ÖKOPROFIT ® of the circle Ennepe -Ruhr is nearing completion . In particular, small and medium-sized enterprises should be encouraged to implement projects in the company's environmental and climate protection, aiming not only to compliance with the relevant environmental legislation , but also lead to cost savings. Within the last few months , the project participants were tested for their optimization potential , particularly in relation to the important issue of energy efficiency , reviewed and supported in the change .

On the 20th of February. 2014 presented the companies involved in the project as part of an interim report presenting a selection of their previous measures for environmental and climate protection.DÜCHTING PUMPEN and the other project participants were able to show a great success .

For example, ventilation systems were optimized , old e- devices replaced by more efficient , lighting replaced ( LED ) and made ​​an adjustment of the heater / thermostats and optimizes the compressed air network.

To be continued ....

SALES MEETING 2014

1sd int. SALES MEETING

An exciting and eventful week layes behind us. This year DÜCHTING opened it’s headquarter in Witten for the first SALES MEETING.

Read more

1sd int. SALES MEETING 2014

An exciting and eventful week layes behind us. This year DÜCHTING PUMPEN opened it’s headquarter in Witten for the first international SALES MEETING.

42 people from 23 countries have accepted our invitation and spent three exciting, educational and communicative days with us.

The response was overwhelmingly positive and the large "DÜCHTING family" has become a lot closer together.

In time also our new WORLDgarden was completed.

SWPF, Saudi Arabia

12. - 14. January 2015

Booth: # B16

1sd Participation together with our partner PROJECX (Invitation)

Read more

SWPF 2015 (Seawaterdesalination)

The 10th edition of the Saudi Water and Power Forum (SWPF), Riyadh - in the heart of the water and electricity industry! SWPF is an annual forum and exhibition for water and electricity stakeholders under the Ministry of Water & Electricity and takes place 12th - 14th January 2015.

DÜCHTING PUMPEN in conjunction with our partner PROJECX (Invitation) participates for the first time.

Visit us at booth # B16. For more information: www.ksawpf.com

SME, Denver USA

15. - 18. February 2015

Booth: # 1569

DPNA - DÜCHTING PUMPS North America is taking part in it for the second time.

Read more

SME 2015 (Mining)

For the 117th time this month the SME Annual Conference & Expo will be held in the Colorado Convention Center in Denver.
From 15 to 18 February 2015, the mining industry's best and brightest are coming and DÜCHTING PUMPEN likewise.
DPNA our office in North America is taking part for the second time.

Visit us at booth # 1569. For more information: www.smeannualconference.com

ATYRAU Oil&Gas, Atyrau

14. - 16. April 2015

Booth: Hall 1 / #45

In cooperation with DPRU - DÜCHTING насосы Russia & CIS already the second participation.

Read more

ATYRAU Oil&Gas (Industrial Applications)

For the 14th time the Atyrau Oil & Gas will be held in the North Caspian region.

The 14th Regional Atyrau Oil & Gas (Atyrau Oil & Gas) exhibition returns on 14th - 16th April 2015 at the Atyrau Sports Complex in Atyrau, Kazakhstan.

We look forward to seeing you at our booth # 45. More information can be found on the website.

MWR, Moskau

21. - 23. April 2015

Booth: Halle 15/ #A601

Visit us at our booth, we are looking forward meeting you!

Read more

MINING WORLD RUSSIA (Mining)

The 19th International exhibition and conference for the mining industry and mineral-processing industry Mining World Russia and DÜCHTING PUMPEN participates again.

From 21 - 23 April in the exhibition hall Crocus Expo in Moscow.

Visit us at our booth, we are happy to see you. More info: miningworld-russia.primexpo.ru/en

CIM 2015, Montreal

09. - 13. May 2015

Booth: #1314

DPNA and our partner XYLEM participate for the second time.

Read more

CIM2015 CONVENTION (Mining)

The CIM Expo! - Canada's leading mining show features nearly 500 companies which become the opportunity to present the latest in mining machinery, tools, technologies and products. From 09th - 13th may, at the Palais des Congrès in Montréal.

Visit us and our partner XYLEM at our booth # 1314.

New Service-Partner EWEX

For several years, we are supported by the highly qualified staff of EWEX-ENGINEERING...

Read more

For several years, we are supported by the highly qualified staff of EWEX-ENGINEERING in several worldwide service operations. Since May 2015, they joint us in  co-operation as the official service partner.

MINEX 2015, Izmir

14. - 16. May 2015

Booth: (follows)

In coopersation with our partner Seterm we participate at the MINEX fair.

Read more

MINEX 2015 Fair (Mining)

MINEX 2015 - The 6th International Mining, Natural Resources and Technology Exhibition from 14th - May 16th, 2015 in Izmir.

Offering leading Turkish and foreign companies and institutions, the machinery, equipment, appliances, chemicals and engineering services in the fields of mining and mineral processing and exhibiting at the IZFAŞ-İzmir fairgrounds.

We warmly welcome you at our booth. More info: minex.izfas.com.tr/en/anasayfa

Pumps,Valves & Pipes Africa

20. - 22. May 2015

Booth: Hall 2 / #9

Together with Rhine Ruhr Pumps, we participate in Johannesburg.

Read more

Pumps,Valves & Pipes Africa (Industry)

20 - 22 May, the 9th International Trade Fair for Suppliers:
mining; Water Utilities; National and Local Government; Industrial and civil engineering; Manufacturing, food, beverage, dairy, brewing, agriculture and horticulture; Petrochemicals; Pulp & Paper, instead.

In cooperation with Rhine Ruhr Pumps DÜCHTING PUMPEN participates for the first time this year in the Gallagher Convention Centre, Midrand Johannesburg.

Visit us at our booth # 9 in Hall 2

Chinese safety certificate

Since beginning of this year we are in possession of the safety certificate...

Read more

Chinese safety certificate for the pump series HPXU (HK)

Since beginning of this year we are in possession of the safety certificate of approval for mining products for our HPXU (HK) series. By obtaining this certificate from “The State Administration of Coal Mine Safety” we may sell our HPXU (HK) pumps into the Chinese coal mines. The certificate guarantees and ensures that our pumps type HPXU (HK) can be used in coal mines without safety concerns.

ACHEMA 2015

The mass of people at the ACHEMA 2015 was overwhelming and made the fair for DÜCHTING PUMPEN, our representatives, customers and visitors a great experience.

Read more

ACHEMA 2015

The quality of the discussions with visitors from Germany and abroad, the number of new contacts made and the presence of our partners, customers and visitors and their response to our booth presentation and the new product portfolio were very interesting and very positive.

We thank all visitors and guests and hope that our products and services caught your interest. We look forward to seeing you at the next opportunity.

Should you require further information, offers or contact please do not hesitate to contact us at any time.

Presentation: SICcast for Desalination (Spanish)

Jose Espinosa ...

Read more

Presentation: SICcast forDesalination (Spanish)

Jose Espinosa (Manager Seawater Desalination) held a presentation with the focus "SICcast for Desalination" (spanish) at the AEDyR in Madrid.

Read more here...

Watch the video here: https://www.youtube.com/watch?v=J5rQfi6e6_o

Presentation: High Pressure Pumps & SICcast for desalination

Antonio Avello (Area Sales Manager South America) and Jose Espinosa (Manager ....

Read more

Presentations: High Pressure Pumps & SICcast for desalination

Antonio Avello (Area Sales Manager South America) and Jose Espinosa (Manager Seawater Desalination) held lectures/presentations at the 1st Seminar "Desalación por Osmosis Inversa" in Cabo San Lucas (Mexico) with the topics "SICcast for seawater desalination" (Spanish) and "high-pressure pumps for seawater desalination "(Spanish).

Participants were recognized manufacturers around the water market, International Manufacturers (instrumentation, pumps, chemical dosing systems, filters, containers ...) and plant manufacturers.

ATEX for mineral cast pumps

The mineral cast pumps type MC series comply with the ATEX regulations (EC directive 94/9 / EC) and ...

Read more

ATEX for mineral cast pumps

The mineral cast pumps type MC comply with the ATEX regulations (EC directive 94/9 / EC) and can be used in the following hazardous areas.

Ex II 2g c IIC T5 X

Ex II 2D c T100°C X

IDA World Congress

30. Aug. - 04. Sept. 2015

Booth: # 636

Visit us at the IDA Congress & Exhibition and see our newest & largest exhibition pump modell.

Read more

IDA World Congress (Seawater)

Join Us in San Diego, California, USA
From 30th august to 04th september the IDA World Congress 2015 promises to be the most anticipated event for the global desalination community.

We are looking forward meeting you at our booth.

KATOWICE Fair 2015

08. - 11. September 2015

Stand: Sektor B / #B29

Together with our polish representative MAGOOB we participate with a totally new booth-concept.

Read more

KATOWICE Fair 2015 (Mining)

Visit us at the KATOWICE Fair 2015 from 8. - 11. september in Katowitz, Poland.

The international Fair of Mining, Power Industry and Metalurgy has a 30-year-old tradition and the biggest mining show in Europe.

We are looking forward to meeting you at our stand.

MINING Indonesia

09. - 12. september 2015

booth: B-5221

In cooperation with our representative Multan Kusuma Sakti PT we participate for the first time. Welcome to our booth.

Read more

MINING Indonesia 2015 (Mining)

The 17th edition of the  MINING INDONESIA 2015 will be held from 09. to 11. September in Jakarta, Indonesia.

Our partner and we are looking forward meeting you there.

E, P & RE Indonesia 2015

16. - 11. September 2015

Booth: D-8910

Together with our representative PT. Multan Kusuma Sakti we participate for the first time.

Read more

Electric, Power & Renewable Energy Indonesia 2015

Electric, Power & Renewable Energy Indonesia may be a good platform for positioning & branding our company in and outside Indonesia. We participate together with our partners from PT. Multan Kusuma Sakti for the first time at the Electric, Power & Renewable Energy Indonesia 2015. Please meet us at our booth # D-8910.

For more info please also visit: http://electricindonesia.com

ÖKOProfit - Awarded as a "Leuchtturm-Projekt"

We already reported on the successful participation in the ÖKOPROFIT project 2013/2014. Now DÜCHTING PUMPEN was additionally awarded ...

Read more

 

Ökoprofit - "Ecological Project for Integrated Environmental Technology" - is a certification process, whose aim is the sustainable economic and ecological strengthening of companies.

As part of the anniversary event "15 Years of Ökoprofit Nordrhein Westfalen" 15 flagship projects were selected from 75 competition entries in five categories. DÜCHTING PUMPEN was awarded in the category "employee engagement".

Factsheet DÜCHTING PUMPEN (de)               Pictures: Efficiency Agency NRW

EXTEMIN 2015

21. - 25. september 2015

booth: Pav. 2 / # 722/723

This year be participate again at the EXTEMIN. See you in Peru.

Read more

EXTEMIN 2015 (Mining)

The 32th EXTEMIN (Perumin) Mining Convention takes place in Arequipa, Peru this year and will be held from 21. - 25. september.

DPSA - DÜCHTING PUMPS South America and we are looking forward seeing you on site.

In-house: Fire at will!

The Big BANG at DÜCHTING PUMPEN.

During the recurrent training for internal firemen also aerosol cans are blown up ....

Read more

Fire at will!

 

The Big BANG at DÜCHTING PUMPEN.

During the recurrent training for internal firemen also aerosol cans are blown up. 23 employees have been trained as firemen this year.

KIOGE 2015

06. - 09. October 2015

Booth: (folgt)

DÜCHTING PUMPEN participates at the Oil & Gas exhibition KIOGE. Meet us at our booth.

Read more

KIOGE 2015

The exhibition KIOGE takes part from 06. - 09. October in Almaty, Kasachstan, and will be a good posibility to positioning and branding our company and meeting new customers or increase our customers loyalty, in and outside of Kasachstans.

We are looking forward meeting you there.

For more info please visit: http://kioge.kz/en/

 

KHIMIA '15

27. - 30. October 2015

Booth: (folgt)

DÜCHTING PUMPEN participates for the first time at the chemical exhibition KHIMIA. We are looking forward meeting you at our booth.

Read more

KHIMIA 2015

Meet us at the KHIMIA from 27. - 30. October in Moskau, Russia. We are looking forward to meeting new customers an positioning our company at the chemical market.

For additional information please visit: http://www.chemistry-expo.ru/en/chemistry2011/

 

CHINA COAL

29. Oct. - 01 Nov. 2015

Booth: W2138

We are looking forward meeting you at our booth at the CHINA COAL.

Read more

CHINA COAL

We are looking forward meeting you at our booth at the CHINA COAL in Beijing, China from 29. Okt. - 01 Nov. 2015 .

CHEMShow

17. - 19. November 2015

Booth: 654

Together with DPNA we participate for the first time at the CHEMShow in New York.

Read more

CHEMShow

DPNA - DÜCHTING PUMS North America as same as we are looking forward meeting new customers at the CHEMShow in New York, USA. The exhibition will be held from 17. - 19. November in the Javits Convention Center.

 

For more information please visit: http://www.chemshow.com/

EXPOMIN 2016

25. - 29. April 2016

Booth: #255-2

Together with DPSA we'll participate again at this years EXPOMIN  in Santiago de Chile.

Read more

EXPOMIN 2016

DPSA - DÜCHTING PUMPS South America is looking forward to meet clients and partners at the EXPOMIN in Santiago de Chile. The fair takes part from 25. - 29. April in Espacio Riesco.

PR: Highly wear-resistant pump for abrasive materials

Düchting extends its pump-portfolio with a series of single-stage centrifugal pumps. The WRX series was developed for the transportation...

Read more

Highly wear-resistant pump for abrasive materials

Extension of the "Heavy duty" portfolio

Highly wear-resistant pump for abrasive materials

Düchting extends its pump-portfolio with a series of single-stage centrifugal pumps. The WRX series was developed for the transportation of abrasive materials and is suitable for use in dredgers and other strenuous applications in the mining and processing of gravel and sand.

The new WRX series was developed for the toughest conditions and abrasive products. It is highly resistant to both the stress caused by sliding wear (fine particulate matter such as sand) and the impact stress of larger particles (eg, gravel).

The design characteristics of these single-stage centrifugal pumps are such that allow an oversized wall thickness for the wear plates on the suction and drive side of the pump. Even the closed, 2 or 3-vaned impeller, is designed for use in harsh environments with high stress loads. Shaft sealing can either by stuffing box or mechanical seal. The bearings are durable, oil or grease lubricated, heavy duty bearings which are used to ensure long service life and also reduce vibration and noise.

The hydraulic components of the WRX pump are made of various grades of cast iron, and are selected by the Düchting engineering for each particular application. Standard material for wear parts is high chromium abrasion resistant cast iron with hardening of min. 550 HV. Other materials are available on request.

Additional adaptations of the WRX series include its usage as an underwater pump in a vertical cantilever design and a counterclockwise rotation design for internal combustion engine drives.

The WRX-pump is designed to operate at low speeds reducing the wear and thereby lowering operating costs and extending the life of the pump.

Given the robust design and capability of handling flow rates up to 22,000 gpm (5,000 m m3/hr) and pressures up to 150 psi (16 bar) the WRX series is ideally suited but not limited to the use in sand and gravel plants, such as suction dredgers. Other target markets would be the iron and steel industry, coal and potash mining, chemical industry, and the sugar industry.

Read more about the WRX here.

In house: New Media & Press section online

From now on, all publications such as articles, press releases and ads are available for viewing online at your disposal by clicking Media & Press at the top of the page.

Read more

New Media & Press section online

 

In house: DPRU - DÜCHTING PUMPS Russia

DÜCHTING is happy to announce that an influential decision was made in June 2016, on opening a sales office in Saint Petersburg, Russia.

The Russian representative ...

Read more

DPRU - DÜCHTING PUMPS Russia

DÜCHTING is happy to announce that an influential decision was made in June 2016, on opening a sales office in Saint Petersburg, Russia.

The Russian representative Duchting-nasosy GmbH was founded in order to offer customers the best technical support and an optimized information flow.

The possibilities of the Russian representation will be increased and custom-designed by a direct information channel to DÜCHTING PUMPEN in Germany. Bureaucratic obstacles such as the customs clearance of the goods by the customer will be degraded. A process optimization, cost reduction and shortened delivery times are only three supporting decision support for a new Düchting representation in Russia.

Global Petroleum Show

07. - 09. July 2016

Booth: #7234

XYLEM will show our pump model type HPXL 125x6 at the Global Petroleum Show in Calgary/Kanada. Visit the booth #7234.

Read more

Global Petroleum Show

XYLEM will show our pump model type HPXL 125x6 at the Global Petroleum Show in Calgary/Kanada. Visit the booth #7234.

Read more about the HPXL series here.

AEP - American Electric Power / BRO Forum 2016

01. - 04. Ausgust 2016

Booth: #____(later)

AEP - American Electric Power / BRO Forum 2016

Read more

AEP - American Electric Power / BRO Forum 2016

AEP - American Electric Power / BRO Forum 2016 is an invitation only, annual event held in Columbus, Ohio from 01. to 04. August that brings together AEP employees, utility company guests and top industry suppliers to network and learn about Plant and Boiler Reliability Optimization (BRO) through technology and process improvement.

DÜCHTING and DPNA- DUECHTING PUMPS North  America is pleased to be exhibiting. Visit us at our Booth.

Over 1000 MCC pumps sold

With the current orders received from China, more than 1000 MCC pumps have been sold worldwide.

A sizable number in the MCC's twentieth anniversary year after ...

Read more

Over 1000 MCC pumps sold

With the current orders received from China, more than 1000 MCC pumps have been sold worldwide.

A sizable number in the MCC's twentieth anniversary year after the first edition of the original MCL version. The forward-looking, trend-setting success concept was proven right and will prove itself in the future.

Open Mineral Cast Impellers for MC series

Together with the growing range of applications we recognized an increase of requests for MC type pumps with open impellers. These requests are not only coming from new customers ...

Read more

Open Mineral Cast Impellers for MC series

Together with the growing range of applications we recognized an increase of requests for MC type pumps with open impellers. These requests are not only coming from new customers. Also a lot of clients which already successfully use our MC pumps are asking for open impellers. They have applications where they want to have the benefit of using our SICcast®material, but where their process forces them to use open impeller.

To fulfil these increasing needs DÜCHTING engineers developed open impellers for the MC pump series. Our clients now can choose between the standard, well approved closed impellers, or our brand new open impellers. The design of the open impellers allows us to easily replace a closed impeller with an open one in an existing pump without any necessary major changes to the pump.

If you want to learn more about our open impellers for the MC series please contact our sales team.

Electra Mining 2016

12. - 16. September 2016

Booth: Hall 9  #C18

 

Expo Centre Nasrec

Johannesburg, South Africa

Read more

Electra Mining 2016

Discover all the latest in products, services, technologies and trends at the largest mining, industrial, electrical and power trade show in Southern Africa. It’s 4 shows in 1. Together with our partner Rhine Ruhr Pumps we will exhibit from 12-16 september at the Expo Centre Nasrec, Johannesburg, South Africa

Pump & Turbo Symposia Exhibition 2016

12. - 15. September 2016

Booth: #____(later)

Pump & Turbo Symposia Exhibition

Read more

Pump & Turbo Symposia Exhibition 2016

The Pump & Turbo Symposia Exhibition Turbomachinery and Pump Symposia (TPS) serves as the premier training and networking opportunity for professionals in both pump and turbomachinery industries. TPS 2016 will be held September 12-15, 2016 at the George R. Brown Convention Center in Houston, Texas. The annual event combines a world-class program with an international exhibit hall; last year, attracting more than 5,500 people and 350 exhibiting companies from 48 countries.

DÜCHTING und DPNA- DUECHTING PUMPS North America is pleased to meet you at our booth.

AUTOMATIK 2016

13. - 15. September 2016

Booth: B 1004

 

Brøndby Hallen

Brøndby / DENMARK

Read more

AUTOMATIK 2016

The seventh edition of Automatik will be held in Brøndby Hallen in the period 13–15 September 2016. Automatik is held every two years in Brøndby Hallen. The trade fair is organised by MCH in partnership with a committee consisting of representatives from trend-setting sector organisations in the industry. It is expected that approximately 175 exhibitors will be present when the doors open on 13 September 2016.

Together with our denmark partner PumPac we will participate.

Meet us at our booth.

 

3rd Intern. Rotating Equipment Conference

14. - 15. September 2016

Booth: #B43

Congress Center Düsseldorf

Düsseldorf / GERMANY

Read more

3rd Intern. Rotating Equipment Conference

The world’s leading rotating equipment convention is an innovation platform that offers participants a unique opportunity. From 14.-15. September nearby in Düsseldorf.

DÜCHTING will participate and is looking forward to meet you at our booth.

 

KHIMIA 2016

19. - 22. September 2016

Booth: #2.1.B50

 

Expocentre Fairgrounds

Moskau / RUSSIA

Read more

KHIMIA 2016

Again this year DÜCHTING participates together with our new russian dependance at the KHIMIA in Moskau. From 19.-22. September the KHIMIA 2016 International Exhibition for the Chemical Industry and Science takes place.

DÜCHTING and DPRU are looking forward to meet you at our booth.

MINExpo 2016

26. - 28. September 2016

Stand: #North Halls 1466

 

Las Vegas Convention Center

Las Vegas / USA

Read more

MINExpo 2016

Solutions that make it possible for the mining industry to meet the challenges and capitalize on the opportunities in a rapidly changing world in need of metals, minerals and energy. Solutions are found at MINExpo 2016 from 22.-28. september, with imaginative new products and services, innovative technologies and learning from the expertise of others. That is why, every four years, leaders, managers and decision makers from the mining industry and of course also DÜCHTING come to MINExpo.

DÜCHTING und DPNA are looking forward meeting you at our booth #1466 in the North Halls.

Read more: www.minexpo.german-pavilion.com

RUDNIK 2016 Perm

11. - 14. October 2016

Booth: # F23

 

Perm / RUSSIA

Read more

RUDNIK 2016 Perm

DÜCHTING and DPRU are looking forward meeting you at our booth at RUDNIK exhibition in Perm.

24th World Mining Congress

18. - 21. October 2016

Booth: # (later)

Centro de Convenções SulAmérica

Rio de Janeiro/ BRAZIL

Read more

24th World Mining Congress

WMC 2016 - The World Mining Congress is a world mining event that takes place every 3 years. DÜCHTING participates for the first time at this exhibition in Rio de Janeiro 18. - 21. October 2016.

See you at our booth.

FIHAV 2016

 

31. Oct. - 04. November 2016

Booth: # 17 - 14

 

Rio de Janeiro/ BRAZIL

Read more

FIHAV 2016

DÜCHTING and our representative P.A.S.I. are looking forward meeting you at the FIHAV in Havanna/KUBA.

Mining Turkey 2016

24. - 27. November 2016

Booth: (later)

 

Istanbul / TURKEY

Read more

Mining Turkey 2016

Come and visit DÜCHTING at the our booth together with SETERM our turkish partner company at the Mining Turkey 2016 which will take place at Tüyap Fair Convention and Congress Center in Istanbul.

The Mining Turkey, the most comprehensive fair of the mining sector in Eurasia, will bring together mineral exploration, production, enrichment, valuation technologies and services.

We look forward meeting you at our booth.

POWER-GEN International

13. - 15. December 2016

Booth: #3673

 

Orlando, Florida / USA

Read more

POWER-GEN International

Come and visit DÜCHTING booth #3673 at POWER-GEN International 2016 which will take place at Orange County Convention Center in Orlando.

POWER-GEN International is the industry leader in providing comprehensive coverage of the trends, technologies and issues facing the generation sector. Displaying a wide variety of products and services, POWER-GEN International represents a horizontal look at the industry with key emphasis on new solutions and innovations for the future.

Pumps & Valves

29. - 30. March 2017

Booth: #A:17

 

Dortmund / Germany

Read more

Pumps & Valves

Come and visit DÜCHTING at one of the few exhibitions in "our area", at booth # A:17 at the Pumps & Valves in the Westfallen halls in Dortmund.

The trade fair for industrial pumps, valves and processes enables exhibitors to present their innovations, trends and solutions on the subject of pump and valve technology to a specialist audience in the economic city of Dortmund.

Parallel to the established maintenance Dortmund - the trade fair for industrial maintenance - the industry is an ideal platform for business, information exchange and networking. In addition to the exhibition, trade visitors are expected to have a varied program of lectures.

IEExpo (China)

04. - 06. May 2017

Booth: # E3- 3220

 

Shanghai/ CHINA

Read more

IEExpo

The IE Expo is Asia's leading trade fair for environmental technology and is the most important platform for practice-oriented solutions in the fields of water supply, waste water, waste disposal, recycling, air pollution control, environmental technology and renewable energies. The IE Expo is a must for international companies if they want to conquer the Chinese market.

The IE Expo is an offshoot of IFAT in Munich, the world's leading trade fair for water, waste water, waste and raw materials, and is accompanied by a first-rate technical-scientific conference program. This is the focus of knowledge, the exchange of ideas and networking between national and international exhibitors and visitors.

IE Expo will take place in Shanghai on 3 days from Thursday, May 04 to Saturday, May 6, 2017. You will find our partner Shanghai Golden Bridge, which is represented at booth 3220 in hall E3.

New Representative in the USA!

Düchting Pumps North America signed a contract with ESL - Environmental Services, Ltd. as a new representative in the USA for all markets in North Dakota, South Dakota, Minnesota, Eastern Montana and Eastern Wyoming.

Read more

New Representative in the USA!

Düchting Pumps North America signed a contract with ESL - Environmental Services, Ltd. as a new representative in the USA for all markets in North Dakota, South Dakota, Minnesota, Eastern Montana and Eastern Wyoming.

Under the premise of bringing a local vendor of Engineered Products and Services into the North Dakota market, Environmental Services, Ltd. was formed in 1989.

Environmental Services, Ltd. is committed to providing the highest quality products and services, adding value through knowledge and experience, for everyone we work with, using integrity, cooperation and reliability.

 

Read more under: www.eslmandan.com/

AEP GO Forum 2017

07. - 10. August 2017

Booth: # (later)

 

Columbus, Ohio / USA

Read more

AEP GO Forum 2017

GO Forum is an annual event that brings together AEP employees, utility company guests and top industry suppliers to network and learn about Plant and Generation Optimization (GO) through technology and process improvement.

The AEP GO Forum 2017 will take place in Ohio from 7 May to 10 August 2017 and we look forward to your visit at our booth.

AQUA Nor

15. - 18. August 2017

Booth: # E-435

 

Trondheim / NORWAY

Read more

AQUA Nor

Since 1979, Aqua Nor has been an important international meeting place for the aquaculture industry, and it is today the world’s largest aquaculture technology exhibition.

Together with our Partner Centri AS we participate at the AQUA Nor in Trondheim . This exhibition takes place from 15. to 18. August 2017 and we are looking foward meeting you at our booth E-435.

Katowice 2017

15. - 18. August 2017

Booth: # E-435

 

Trondheim / NORWAY

Read more

Katowice 2017

The International Fair of Mining, Power Industry and Metallurgy has a 30-year-old tradition and is organized biennially in Katowice, the capital of Polish mining industry.

The next edition of the International Fair of Mining, Power Industry and Metallurgy “KATOWICE 2017” will be held from the 29th of August to the 01th of September 2017. Together with our partner MAGOOB we participate again and look forward meeting you at our booth.

Subscribe to our RSS News Feed, so you get ongoing news about fairs, innovations and changes.

Subscribe to Syndicate